Are you unable to watch your preferred program? Is your remote control malfunctioning? But don’t worry! We are able to repair it.

There could be various reasons why the Insignia Fire TV remote is not functioning. We need to identify the issue initially.

It is important for you to know why your remote is not working before fixing it, just like a doctor who can’t treat a patient without knowing the disease first.

Initially, verify the batteries if your Insignia Fire TV remote is malfunctioning. If the issue persists, you have the option to reset both the TV and the remote. If none of the resolutions prove effective, you may consider purchasing a replacement remote.

Additionally, you can peruse this article and discover simple methods to repair your Insignia Fire TV remote.

Let’s begin!

If you are having trouble with your Fire TV remote from Insignia, you can try replacing the batteries. This is something you can attempt based on my own experience.

If there is a strong connection signal and your TV is properly paired with the remote, it’s worth checking as well. Sometimes, the remote can stop working if the batteries are dead or low.

If none of these solutions work, you may need to reset your remote or clean it. I hope this advice helps you find a solution to your remote troubles.

1. Dead Batteries

Batteries are a device used as a power source for electricity. When using your Insignis TV remote, it will not work if the batteries are dead or used.

This suggests that batteries are essential components of a device for its proper functioning. It would be advantageous if you use long-lasting batteries.

I recommend using Eneloope_Brand rechargeable batteries. On average, these batteries can last for about a year, which is much longer than lithium batteries. Moreover, if you hate changing batteries frequently, Eneloope_Brand batteries are the perfect choice for you.

What batteries does Insignia Fire TV remote use?

Insignia AAA batteries are used in Insignia TV and Fire remotes, which are heavy-duty devices for controlling various functions. These batteries are known for their high charge capacity and utilize alkaline chemistry.

2. How To Do a Simple Reset?

Attempt to reset the remote using a straightforward approach before trying any intricate methods. We should give it a shot, even though it might not always yield results.

Rotate your remote and open its rear side.

Remove the batteries.

Please be patient for a duration of two to three minutes.

Place the batteries back in their original position.

Check your remote by pressing different buttons. If your remote works, you don’t need to look for other methods to fix it.

This method won’t take long, furthermore. If you don’t get disheartened, this work won’t fix if. We have many other ways to fix the Fire TV Insignia remotely.

Let’s have a glimpse at them.

3. Manual Reset Of Insignia Fire TV Remote.

Problem your solve to favorable and easy very is remote your resetting. Setting default this to device the converting means resetting? What’s.

Now, we’ll explore how to reset the Insignia Fire TV controller. Follow the provided instructions.

Find the “Home” button on your remote control.

Press and hold the button for a few moments, and then let go of the button.

Now, locate the menu button.

Press it nine times. It’s preferable to take out the batteries from the remote.

Disconnect your Insignia Fire TV and wait for a minimum of sixty seconds.

Connect your television and insert the batteries back into your remote control.

After the home screen shows up, press and hold the “Home” button.

4. Repair your TV With the remote

If your Insignia Smart TV remote is not functioning, even after being paired, you will need to repair it. It is possible that your remote is not currently connected to your TV.

How do I pair my Insignia Fire TV remote?

You must adhere to particular procedures to accomplish this.

You will discover a “Pair” button located beneath the battery compartment at the rear of the remote.

Press the button and keep it pressed for a few seconds.

If the aforementioned method fails, find and press the “Home” button.

Keep it for thirty seconds.

Hold the “Menu” button, the left “Navigation” button, and the “Back” button simultaneously for a duration of thirty seconds. This represents the third approach.

5. TV Reset To Factory Default Settings

It’s not always your remote control that causes issues. Your television also requires a reset. Resetting the television might resolve your issue.

To reset your television, you will need to download the Insignia Remote Application.

Resetting a television is similar to having a completely new television with its original settings from the factory.

How to reset Insignia smart TV?

In order to restart an Insignia Smart TV, there are several protocols that must be adhered to. Let’s examine the provided instructions.

Power up your Insignia Smart TV and select the “Cog” Icon.

Navigate to “Settings” and select “My Fire TV.”

Find and select “Restore to original settings.”

Click on “Reset.”.

Keep in mind that resetting will delete your applications and all of your personal data.

6. Fixing the remote sensor

Ensure that you clean your remote sensor thoroughly as it may cease to function properly if dust accumulates within it. In case the Insignia remote is not functioning, it is advisable to examine the sensor and ensure it is free from any dirt or debris. It is crucial to maintain its cleanliness on a regular basis.

There are two methods to repair a remote sensor.

Restart the Insignia TV.

Clean the sensor of your Insignia television.

How to power cycle Insignia TV?

It’s effortless to power cycle your insignia smart TV. Power cycling means turning the hardware off and then turning it on again.

We can reset the television by following the provided instructions.

Disconnect your television from the power outlet.

Press the “power” switch for a duration of one minute.

Then, let it go.

Now, verify the functionality of your remote control to determine if it is functioning properly or not.

How to clean your TV sensor?

If your sensor is full of dirt, the device won’t be able to catch the signal from other devices. It’s necessary to clean the sensor of the TV once every two weeks by connecting it remotely.

Let’s watch this video to gain a deeper comprehension.

7. Contact your manufacturer of the remote.

If there is a technical problem, it should be handled by a technician or an expert. If none of the methods assist in resolving the issue, it could possibly be considered a technical difficulty.

You are unable to repair it. Due to a manufacturing defect, the device will stop working before its warranty date. To have it repaired, you should contact the manufacturer and ask them to send a replacement device that functions properly.

Only an expert is capable of resolving the problem. There might exist a concern with the internal electrical connections or other technological complications. The producer will rectify it on your behalf.

8. Buy a new remote

In order to utilize it, you will need to acquire a fresh remote if your current one becomes unusable as a result of internal component damage. When there are no means to fix your previous Insignia Fire TV remote, you will be required to purchase a replacement.

There is a small chance of repairing it when you expose the device to heat or water, for example. There is a little chance of leaving some damages for repairing the remote.

You can purchase a brand new remote from Amazon at an affordable cost.

Can we use third-party remotes?

Indeed, we do have the choice to make use of third-party remotes, however, it is necessary for us to establish a connection with the Insignia Fire TV that is akin to the original remote.

Switch on your television and Universal Insignia remote.

Afterwards, press and hold the “Insignia TV” button for a duration of three seconds.

Aim the remote control at the television.

Scroll vertically to power off your device.

Press the “Insignia TV” button once more to store the code.

Let’s explore various Remote options to connect with the Insignia Smart TV.

Serial NoRemote NamesPriceAvailable At

Conclusion

The Insignia TV Fire remote serves as a vital companion to enhance your entertainment experience, offering a wide range of functionalities, including quick access to voice control and easy navigation.

However, it is not uncommon to encounter issues with the remote that can disrupt your viewing pleasure. This article discusses practical steps to address these problems effectively and provide solutions to troubleshoot the remote.

By following the recommended tips such as performing a factory reset, ensuring proper pairing, and checking batteries, you can often regain control over entertainment and resolve remote-related issues.

Remember to explore the manufacturer’s resources and user manual for specific troubleshooting options and further assistance with optimizing the performance of your Insignia Fire TV remote. With a little patience and troubleshooting know-how, you can continue to enjoy seamless navigation, convenient controls, and immersive entertainment with your Insignia Fire TV remote.

Don’t let TV remote issues hinder your Insignia TV viewing experience with the joy of hassle-free TV viewing. Overcome these issues and empower yourself with the knowledge and solutions to enhance your TV remote experience.

FAQs

Can I control other devices, such as my soundbar, with the Insignia Fire TV remote?

The user manual or settings menu of your TV contains guidelines on how to configure and operate additional devices. You can program the Insignia Fire TV remote to control other compatible devices, like soundbars or audio receivers.

What are the dedicated shortcut buttons on the Insignia Fire TV remote for?

The Insignia Fire TV remote provides dedicated shortcut buttons for popular features and apps such as Hulu, Netflix, Amazon Video, and Prime Video, allowing quick access to these services. Additionally, the remote also includes the voice assistants Alexa from Amazon, providing voice control for the TV and the mentioned apps.

Can I customize the buttons on the Insignia Fire TV remote?

No, the Insignia Fire TV remote does not have the ability to customize the functions of the buttons. They perform specific pre-programmed functions based on their labels.